UP4AC-PLUS 2-4S LiPo/LiFe charger
Order until 15:00 (Local time Europe/Zurich) and your selection will most likely be shipped today.
SWAYTRONIC
UP4AC-PLUS 2-4S LiPo/LiFe charger
Measures:
110x68x35 mm
Weight:
0.22
Kg.
Product number:
7640159368281
Availability:
Available
Delivery Time:
1 - 2 days
CHF 26.05*
Accessories
Please select here conveniently other products from Accessories and Similar items and add them to your order by clicking on the shopping cart in the desired quantity.
Product information "UP4AC-PLUS 2-4S LiPo/LiFe charger"
ULTRA Power UP4AC-PLUS
Ultimate power and performance. - Uncompromising quality.
The new UP4AC-L charger, super compact and handy!
The UP4AC-L charger has a total of 20W charging power and up to 3A charging current.
Perfect for charging 1S - 4S LiPo/LiFe battery up to 4000mAh.
Scope of delivery:
UP4AC-L
1x charging cable stranded wire
1x power cable 2 pole
1x manual english
| Balancer equalisation current per cell (mA): | 200 |
|---|---|
| Brand: | Swaytronic |
| Charging channels: | 1 |
| Charging current channel 1 (A): | 1-3 |
| Charging power channel 1 (W): | 30 |
| Height (mm): | 35 |
| Input voltage AC (V): | 220 |
| Length (mm): | 110 |
| Supported cell count LiIo LiPo LiFe: | 2-4 |
| Supported number of cells NiMH NiCd: | 4-8 |
| Total AC charging power (W): | 30 |
| Weight (gr.): | 220 |
| Width (mm): | 68 |
Login
Warranty for devices / models
The warranty in accordance with the following provisions is 2 years, unless otherwise agreed in writing. The warranty period begins with the date of delivery. Liability for normal wear and tear and wear parts is excluded.
Devices, models or accumulators which are equipped with a serial number will be recorded by us at the time of goods receipt and goods issue and assigned to the end customer.
Removing the serial number (sticker/inscription) will void the warranty.
The complete warranty conditions can be found in our AGB`s:
Recommendations
UP100AC Plus
ULTRA Power UP100AC Plus
Ultimate power and performance. - Uncompromising quality.
The new UP100AC Plus charger, super compact and full of power!The UP100AC Plus charger has a total of 100W charging power and up to 10A charging current. A sensor-controlled cooling fan protects against overheating. With the additional POWER input DC11-18V, the UP100AC Plus can also be charged on the move via a mobile power source, e.g. car battery.
Scope of delivery:
UP100AC Plus1x Balancer board XH 2-6S1x Charging cable T-PLug1x Power cable 3-pin1x Manual english
Available
UPS4-AC/DC Charger
ULTRA Power UPS4-AC/DC charger
Ultimate power and performance. - Uncompromising quality.
The new UPS4 charger, super compact and handy - now with integrated power supply!The UPS4 charger has a total of 28W charging power and up to 1A charging current (per channel). Perfect for charging 1S - 2S LiPo/LiPo-HV batteries.
Scope of delivery:
UPS41x mains cable 220V1x manual English
Available
Tip
SWAYTRONIC LiPo SAFE-BAG red
Swaytronic LiPo SAFE-BAG
Protect yourself and your surroundings with the Swaytronic LiPo-Safe Bag.Made from fireproof material for optimum initial protection.
ATTENTION
The Lipo Safe Bag is designed to provide initial protection in the event of a battery fire. These products are not suitable for long-term storage of LiPos and accumulators. For a storage solution, Swaytronic recommends the LiPo Safe Case.
Available
Tip
SWAYTRONIC LiPo SAFE-BAG black
Swaytronic LiPo SAFE-BAG
Protect yourself and your surroundings with the Swaytronic LiPo-Safe Bag.Made from fireproof material for optimum initial protection.
ATTENTION
The Lipo Safe Bag is designed to provide initial protection in the event of a battery fire. These products are not suitable for long-term storage of LiPos and accumulators. For a storage solution, Swaytronic recommends the LiPo Safe Case.
Available
Tip
SWAYTRONIC Charge Marker (2 pieces)
Swaytronic Charge Marker (2pcs.)
Charge Marker - manual charge level indicator red/greenWho doesn't know the problem of losing track of the charge level with many batteries? The solution now comes in the form of the small and ingenious Charge Marker. The Charge Marker can be
the Charge Marker can be attached directly to the battery using an integrated adhesive strip and can be used immediately.
Slide the slider to green after charging. After use, simply switch the slider back to red. This way you'll never lose control of the charge level of your batteries again and you'll always be ready for another flight!
Available
Tip
SWAYTRONIC LiPo SAFE-BAG white
Swaytronic LiPo SAFE-BAG
Protect yourself and your surroundings with the Swaytronic LiPo-Safe Bag.Made from fireproof material for optimum initial protection.
ATTENTION
The Lipo Safe Bag is designed to provide initial protection in the event of a battery fire. These products are not suitable for long-term storage of LiPos and accumulators. For a storage solution, Swaytronic recommends the LiPo Safe Case.
Available
Tip
LiPo voltage tester 1S - 8S digital and programmable
LiPo voltage tester 1S - 8S digital and programmable
This voltage tester shows you the condition of your battery or cells within seconds.
1-8S Lipo / Li-ion / LiMn / Li-Fe.Voltage detection Accuracy: ± 0.01 V1S test mode Voltage range: 4-15VLow voltage alarm mode for 2-8SAlarm set point range: Off 2.7-3.8VWeight: 9g
Functions:
Display total voltage (all cells) and the individual voltage of each cell.During operation / use of a LiPo battery, the battery tester monitors the battery. The individual cells are permanently checked for their voltage and the alarm is automatically triggered when the set cell voltage of the cells is reached / undercut.Connect a battery (1-8 cells LiPo) to the balance plug of the battery tester. The voltage tester acknowledges the connection of the battery with 2 x 5 beeps. The display shows the total voltage (ALL) of the battery in volts and then changes to the voltage of the individual cells (No 1...No 2... No 3... etc.)
Setting the alarm for the cell voltage you want:
Press the button (lower edge button) once. The tester shows the currently set voltage value in volts (based on 1 cell). If this value corresponds to your wish, the programming is finished and the battery tester changes back to the home position in the display.If you want to change the alarm value, press the button twice. The battery tester switches to the next possible value.Repeat this step until the setting you want is displayed.
Programme options:
OFF / 2.70 V to 3.8 V at intervals of 0.10VPress the button once =display the set alarm valuePress the button twice=switch to the next valuePress the button several times to scroll through all values.
Recommendation:The alarm value should not be set below 3.3 volts! LiPo batteries react very sensitively to deep discharge.
Available
Tip
FIREBALLS Fire Protection - Fire Extinguishing Granules 5 litres
FIREBALLS Fire protection fire extinguishing granulate for lithium ion batteries / 5 litres
New and sensational.
This fire extinguishing granulate is the perfect solution for the safe storage and extinguishing of lithium polymer batteries in case of fire.With the fire extinguishing granulate you are also perfectly prepared for all lithium fires in your workshop. If a battery should ignite, you can extinguish it quickly, safely and above all cleanly with the granulate!The granulate is applied softly to the fire. The expanded glass granulate surrounds the fire and smothers it. At particularly high temperatures, the expanded glass melts and spreads over the surface of the burning metal. The melt forms an airtight seal that crusts over as it cools, extinguishing the metal fire. A reignition is effectively prevented.The fire extinguishing granulate is suitable for class D and lithium ion fire loads. Problematic fire loads such as metal fires, battery fires, lithium fires or flammable liquids can be controlled and extinguished with the granulate without causing extinguishing agent damage.The extinguishing effect of the granulate on metal fires was tested and confirmed by the MPA Dresden using a sodium and magnesium fire.
Product features
Forms a protective layerDisplaces oxygenEnvironmentally friendlyResistant to ageingLow weightEasy to handleRetrofittable and maintenance-freeVery good liquid bindingAcid and alkali resistant100% inorganic Inert, low-reactionLow weight (low landfill costs of contaminated material)Low heat conductionSound-absorbingNon-perishableBacteria- and germ-free
Technical data
Supplied in sealed plastic bagCapacity=5 litresBall size=1 to 4mmWeight with packaging=1.2kgPackaging/dimensions = 345x145mm
Available
High quality 3in1 battery balancer / discharger / Z
High quality 3in1 battery balancer / discharger / cell monitor
This balancer can be used for Lipo and LiFe batteries. It measures the cell condition and can be used as a balancer to optimally balance the cells. In discharge mode, the cells can also be prepared for winter storage, for example.The cell charge status is displayed during the entire balancing process. This means that faulty cells can also be detected quickly before a crash is risked in flight.Supported battery types: Li-Polymer / Li-Fe:2 - 6 cells / 7.4V -22.2V
Balance Setting Range (lower limit) : 2V - 4.2V (preset with 3.3V)
Discharge Setting Range (lower limit) : 2V - 4.2V (preset with 3.9V)
Available
Tip
SWAYTRONIC LiPo Box black L
Swaytronic LiPo BOX black
Protect yourself and your surroundings with the Swaytronic LiPo BOX.Size: 250 x 150 x 100mm, made of fireproof material for optimal protection.
Available