Solder Tin 0.8mm 50g
Order until 11:00 (Local time Europe/Zurich) and your products will be shipped approx. tomorrow.
SWAYTRONIC
Solder Tin 0.8mm 50g
Weight:
0.03
Kg.
Product number:
7640159367918
Availability:
Available
Delivery Time:
1 - 2 days
CHF 6.20*
Accessories
Please select here conveniently other products from Accessories and Similar items and add them to your order by clicking on the shopping cart in the desired quantity.
Product information "Solder Tin 0.8mm 50g"
Solder 0.8mm 550g
Material: Tin/lead: 63/37
Flux content: 1.2%
Colour: silver
Melting point: 183 degrees Celsius
Type: Core
Wire diameter: 0.8mm & 50g
Scope of delivery:
1x solder tin 0.8mm 50g
| Brand: | Swaytronic |
|---|---|
| Weight (gr.): | 30 |
Login
Warranty for devices / models
The warranty in accordance with the following provisions is 2 years, unless otherwise agreed in writing. The warranty period begins with the date of delivery. Liability for normal wear and tear and wear parts is excluded.
Devices, models or accumulators which are equipped with a serial number will be recorded by us at the time of goods receipt and goods issue and assigned to the end customer.
Removing the serial number (sticker/inscription) will void the warranty.
The complete warranty conditions can be found in our AGB`s:
Recommendations
High quality 3in1 battery balancer / discharger / Z
High quality 3in1 battery balancer / discharger / cell monitor
This balancer can be used for Lipo and LiFe batteries. It measures the cell condition and can be used as a balancer to optimally balance the cells. In discharge mode, the cells can also be prepared for winter storage, for example.The cell charge status is displayed during the entire balancing process. This means that faulty cells can also be detected quickly before a crash is risked in flight.Supported battery types: Li-Polymer / Li-Fe:2 - 6 cells / 7.4V -22.2V
Balance Setting Range (lower limit) : 2V - 4.2V (preset with 3.3V)
Discharge Setting Range (lower limit) : 2V - 4.2V (preset with 3.9V)
Available
Tip
SWAYTRONIC LiPo SAFE-BAG red
Swaytronic LiPo SAFE-BAG
Protect yourself and your surroundings with the Swaytronic LiPo-Safe Bag.Made from fireproof material for optimum initial protection.
ATTENTION
The Lipo Safe Bag is designed to provide initial protection in the event of a battery fire. These products are not suitable for long-term storage of LiPos and accumulators. For a storage solution, Swaytronic recommends the LiPo Safe Case.
Available
Tip
LiPo voltage tester 1S - 8S digital and programmable
LiPo voltage tester 1S - 8S digital and programmable
This voltage tester shows you the condition of your battery or cells within seconds.
1-8S Lipo / Li-ion / LiMn / Li-Fe.Voltage detection Accuracy: ± 0.01 V1S test mode Voltage range: 4-15VLow voltage alarm mode for 2-8SAlarm set point range: Off 2.7-3.8VWeight: 9g
Functions:
Display total voltage (all cells) and the individual voltage of each cell.During operation / use of a LiPo battery, the battery tester monitors the battery. The individual cells are permanently checked for their voltage and the alarm is automatically triggered when the set cell voltage of the cells is reached / undercut.Connect a battery (1-8 cells LiPo) to the balance plug of the battery tester. The voltage tester acknowledges the connection of the battery with 2 x 5 beeps. The display shows the total voltage (ALL) of the battery in volts and then changes to the voltage of the individual cells (No 1...No 2... No 3... etc.)
Setting the alarm for the cell voltage you want:
Press the button (lower edge button) once. The tester shows the currently set voltage value in volts (based on 1 cell). If this value corresponds to your wish, the programming is finished and the battery tester changes back to the home position in the display.If you want to change the alarm value, press the button twice. The battery tester switches to the next possible value.Repeat this step until the setting you want is displayed.
Programme options:
OFF / 2.70 V to 3.8 V at intervals of 0.10VPress the button once =display the set alarm valuePress the button twice=switch to the next valuePress the button several times to scroll through all values.
Recommendation:The alarm value should not be set below 3.3 volts! LiPo batteries react very sensitively to deep discharge.
Available
Tip
SWAYTRONIC LiPo Box black L
Swaytronic LiPo BOX black
Protect yourself and your surroundings with the Swaytronic LiPo BOX.Size: 250 x 150 x 100mm, made of fireproof material for optimal protection.
Available
Tip
SWAYTRONIC LiPo SAFE-BAG black
Swaytronic LiPo SAFE-BAG
Protect yourself and your surroundings with the Swaytronic LiPo-Safe Bag.Made from fireproof material for optimum initial protection.
ATTENTION
The Lipo Safe Bag is designed to provide initial protection in the event of a battery fire. These products are not suitable for long-term storage of LiPos and accumulators. For a storage solution, Swaytronic recommends the LiPo Safe Case.
Available
Tip
SWAYTRONIC Charge Marker (2 pieces)
Swaytronic Charge Marker (2pcs.)
Charge Marker - manual charge level indicator red/greenWho doesn't know the problem of losing track of the charge level with many batteries? The solution now comes in the form of the small and ingenious Charge Marker. The Charge Marker can be
the Charge Marker can be attached directly to the battery using an integrated adhesive strip and can be used immediately.
Slide the slider to green after charging. After use, simply switch the slider back to red. This way you'll never lose control of the charge level of your batteries again and you'll always be ready for another flight!
Available
Tip
FIREBALLS Fire Protection - Fire Extinguishing Granules 5 litres
FIREBALLS Fire protection fire extinguishing granulate for lithium ion batteries / 5 litres
New and sensational.
This fire extinguishing granulate is the perfect solution for the safe storage and extinguishing of lithium polymer batteries in case of fire.With the fire extinguishing granulate you are also perfectly prepared for all lithium fires in your workshop. If a battery should ignite, you can extinguish it quickly, safely and above all cleanly with the granulate!The granulate is applied softly to the fire. The expanded glass granulate surrounds the fire and smothers it. At particularly high temperatures, the expanded glass melts and spreads over the surface of the burning metal. The melt forms an airtight seal that crusts over as it cools, extinguishing the metal fire. A reignition is effectively prevented.The fire extinguishing granulate is suitable for class D and lithium ion fire loads. Problematic fire loads such as metal fires, battery fires, lithium fires or flammable liquids can be controlled and extinguished with the granulate without causing extinguishing agent damage.The extinguishing effect of the granulate on metal fires was tested and confirmed by the MPA Dresden using a sodium and magnesium fire.
Product features
Forms a protective layerDisplaces oxygenEnvironmentally friendlyResistant to ageingLow weightEasy to handleRetrofittable and maintenance-freeVery good liquid bindingAcid and alkali resistant100% inorganic Inert, low-reactionLow weight (low landfill costs of contaminated material)Low heat conductionSound-absorbingNon-perishableBacteria- and germ-free
Technical data
Supplied in sealed plastic bagCapacity=5 litresBall size=1 to 4mmWeight with packaging=1.2kgPackaging/dimensions = 345x145mm
Available
Tip
SWAYTRONIC LiPo SAFE-BAG white
Swaytronic LiPo SAFE-BAG
Protect yourself and your surroundings with the Swaytronic LiPo-Safe Bag.Made from fireproof material for optimum initial protection.
ATTENTION
The Lipo Safe Bag is designed to provide initial protection in the event of a battery fire. These products are not suitable for long-term storage of LiPos and accumulators. For a storage solution, Swaytronic recommends the LiPo Safe Case.
Available
Soldering rod holder with magnifying lamp
Soldering rod holder with magnifying lamp
Scope of delivery:
1x soldering rod holder with magnifying lamp
Available
3 in 1 Soldering Station Yihua-853D+
3 in 1 soldering station Yihua-853D+
Ultimate power and performance. -Uncompromising quality.
This 3-in-1 unit is based on the company's revolutionary, innovative design and meets the most demanding requirements on the market. The unit uses the latest chip technology and includes a 30V/5ADC power supply, heat gun and soldering station! The unit is space-saving and practical, powerful and energy-efficient. This unit can meet just about all the basic requirements of a soldering station !Temperature controls with core technology and microprocessor PID programming for 100ms high-speed real-time tracking of heat gun output temperatures with real-time calibration! Output temperatures are extremely stable.With PID high-speed temperature calibration in 100ms, conversions are energy efficient and deliver constant power consumption for temperature at a much lower level than comparable devices, which means greater energy savings! The YH soldering iron has a high-temperature silicone cable (damage-free when the 300º hot soldering tip touches the silicone for 30 seconds); the heating element uses a high-power heating element for fast temperature compensation, especially suitable for desoldering raw ends, large joints and hard-to-reach places, as well as for general soldering and joint desoldering.AC stabilised high-speed power supply with continuously adjustable output voltage of 0 - 30V and output power of 0 - 5A. The power supply also has overload protection. The unit also has a voltmeter interface and can replace a high-precision digital voltmeter for AC voltage measurements.The cable of the hot air gun handle also uses a high temperature silicone, and a quiet brushless driven fan and state of the art ceramic framed heater core for extremely smooth and reliable performance! The unique anti-blocking function of the ABS fan ensures the highest possible safety. If the fan stops working unexpectedly and the working stability can no longer be controlled, the system immediately disconnects the heat gun from the power supply to ensure safety for the user and the environment.A/mA conversion function. PID programming information: The core algorithm sets a frequency for measurements, comparisons and executions divided into 20 ms for fast, 100 ms for very fast and 200 ms for high speed . Temperature control for heat gun and soldering iron! PID is one of the most important parameters for temperature accuracy and stability! In cycles of 20ms for each 50Hz half-wave, the programme already has precise controls for each power supply cycle.A variant of the high end YIHUA hot air gun models uses Fast 20ms cycles and the temperature calibration of the soldering iron is set to the two standard cycles High-Speed 100ms and High-Speedl 200ms because the temperature sensor is inside the ceramic heater core. Timing for temperature transfer to the tip of the soldering iron and back: 100ms high-speed cycles provide optimal speed control!
Scope of delivery:
Main unit + Hot air gun + Power cable Manual Soldering iron handleSoldering iron stand + Gun frame + Cleaning sponge 4 nozzles1 piece IC Pick-up
Available
Soldering platform with twin tongs
Swaytronic KT-1801 Soldering Platform with Zwilling Pliers (Without Accessories)
Soldering made easy with the KT-1801!The KT-1801 soldering platform is the ideal soldering tool and a must for every model maker.The two arms can be rotated up and down 180 degrees and also 360 degrees around their own axis.The pliers are solid and thanks to their finely serrated shape they are compatible with any connector system.The KT-1801 will make your work massively easier, four hands instead of two, insensitive to heat, adaptable and time-saving!
Scope of delivery:
1 x soldering platform with twin tongs
Available
Soldering Station Yihua-937D+
Yihua-937D+ soldering station
Ultimate power and performance. - Uncompromising quality.
1.This soldering station offers optimum fast heating, fast temperature compensation, high precision and steady temperature control. 2. Anti-static design prevents damage to sensitive components.3.Our unit uses high quality metal heating that will not twist and is highly durable.5.This model has automatic error detection and alarm functions.
Scope of delivery:
Main unit Soldering iron handle (with iron tips and heating element) Piston stand High temperature resistant spongeOperating instructionsMains plug
Available
2 in 1 Soldering Station Yihua-995D+
2 in 1 soldering station Yihua-995D+
Ultimate power and performance. - Uncompromising quality.
The 995D+ now has a large LCD screen and you can change the digital display for the temperature of the soldering iron and hot air from "Celsius to Fahrenheit" simply by pressing a button.This unit is controlled by a Samsung Dual Core microcomputer processor with programmable PID computer control technology and uses the latest PID high-end precision program. This gives this unit very precise temperature control, high stability, durability and reliability.This unit also incorporates "Temperature Compensation Technology" which allows for quick correction to maintain a stable tip temperature Also, the temperature of the heat gun can be adjusted from 100°C to 480°C and the soldering iron from 200 °C to +480 °C. Independent calibration for both the heat gun and the temperature of the soldering iron for the current working conditions. Air flow and temperature can be easily adjusted. The soldering iron can also be programmed for a "snooze mode" when the desired number of minutes without use (0 - 99 minutes) has been reached. This is very practical and saves electricity.
This model also has 2 "quick memory" buttons for presetting the desired temperature for both the soldering iron and the heat gun. Heat gun with "cold air or hot air" function.The heat gun can also be programmed for either "manual or automatic mode" and it also has an "automatic cool down" function, which means that the heat gun switches to "cold air phase". After it has been placed in its holder and cooled down to a temperature of 100 degrees Celsius, it enters a standby mode and the air continues to flow. When it has cooled down to 70 degrees Celsius, the air flow stops and the unit can be safely switched off. This is a safety feature to prevent damage to the heating element and the unit. The heat gun and soldering iron can be used separately without interfering with each other. This ensures fast heat-up and stable, accurate temperature control, which at the same time is not affected by air flow to achieve lead-free soldering and desoldering. Especially suitable for assembling and reworking SMD components by hand. The ceramic heating element and sensor in this soldering iron ensure a very fast heat-up temperature and fast temperature recovery. You will also appreciate that the heat gun has a new protection function. If the air flow stops while using the hot air gun, the heating element of the gun stops heating to prevent damage to the heating air gun, which improves the safety performance of this product. A 75 Watt output soldering iron with a temperature range of 200 °C - 480 °C with an extremely flexible silicone cable. Intelligent temperature detection, no-load protection, short circuit protection and overload protection. Suitable for SOIC, CHIP, QFP, PLCC, BGA and temperature sensitive components. Suitable for heat shrinking, drying, paint removal, viscosity removal, de-icing, pre-heating and hot gluing
Scope of delivery:
Main unit + gun + power cable Manual Soldering iron handleSoldering iron stand + gun frame + cleaning sponge 4 nozzles1 piece IC Pick-up
Available
Solder Tin 0.8mm 250g
Solder 0.8mm 250g
Material: Tin/lead: 63/37Flux content: 1.2%Colour: silverMelting point: 183 degrees Celsius Type: CoreWire diameter: 0.8mm & 250g
Scope of delivery:
1x solder tin 0.8mm 250g
Available