SWAYTTRONIC - Solar charge controller DR3210N-DDS 30A
SWAYTTRONIC - Solar charge controller DR3210N-DDS 30A
CHF 138.60*
% CHF 198.75* (30% saved)Please select here conveniently other products from Accessories and Similar items and add them to your order by clicking on the shopping cart in the desired quantity.
SWAYTRONIC - Solar charge controller DR3210N-DDS 30A
The DuoRacer MPPT charge controller is used to charge two batteries simultaneously.
In this way, the supply battery and the starter battery can be charged simultaneously during operation.
This controller supports sealed, gel, flooded, LiFePO4 and Li-NiCoMn batteries.
The unit detects the system voltage of the starter battery and automatically switches to trickle charge.
The controller uses the advanced MPPT control algorithm that detects the maximum power point while minimising power loss.
The performance with MPPT technology is increased by 20-30% compared to the PWM charging method.
If there is no manual operation for a long time and the charging conditions cannot be achieved, the controller will switch to energy saving mode, which reduces the loss and waste of battery power to extend the life of the products.
System settings are indicated by the LED and LCD display and can be enhanced by the optional external MT11 display (accessory).
The AES control signal of the auto-refrigerator is built into the controller, which supplies the refrigerator with excess solar energy and maximises efficiency.
The controller has IP33 protection.
Numerous protection functions such as battery overcharge protection, overdischarge protection and reverse polarity protection of the PV and battery are integrated in the unit.
Features:
- Maximum power point tracking technology with ultra-fast tracking speed and tracking efficiency of at least 99.5%
- Advanced MPPT control algorithm to minimise MPPlost rate
- Wider range of MPP operating voltage to improve PV module utilisation
- Automatic control function for charging power and charging current limitation (BATT1)
- Digital circuit control of adaptive three-stage charging mode to extend the life of BATT1.
- The type of BATT1 can be set via LED / LCD.
- The product will be put into energy saving mode if there is no manual operation for a long time and the charging conditions are not efficient
- AES control signal for car refrigerator to avoid energy waste.
- Standard Modbus protocol and RS485 communication port (5 V / 200 mA) to extend the application range
Scope of delivery:
1 x SWAYTRONIC - Solar charge controller DR3210N-DDS 30A
1 x Operating instructions
Brand: | Swaytronic |
---|---|
For battery types: | LiFePO4, AGM, SLA, STD |
For battery voltage (V): | 2-72 |
Height (mm): | 69 |
Length (mm): | 247 |
Max. Peak current (A): | 30 |
Maximum input current PV (A): | 30 |
Maximum input power PV (W) / for battery system (V): | 390W/12V/780W/24V |
Maximum open system voltage PV (V): | 92 |
Operating temperatures (°C): | -20 - + 50 |
Weight (gr.): | 1400 |
Width (mm): | 165 |
Login