SWAYTRONIC charging cable XT90
Tip
Order until 15:00 (Local time Europe/Zurich) and your selection will most likely be shipped today.
SWAYTRONIC
SWAYTRONIC charging cable XT90
Connector plug:
4mm gold
Weight:
0.04
Kg.
Product number:
7640159361848
Availability:
Available
Delivery Time:
1 - 2 days
Ratings:
(3)
CHF 8.55*
Accessories
Please select here conveniently other products from Accessories and Similar items and add them to your order by clicking on the shopping cart in the desired quantity.
Product information "SWAYTRONIC charging cable XT90"
SWAYTRONIC charging cable
Application
With the high-quality Swaytronic charging cables you can charge your batteries quickly and safely.
Your advantage
A large selection of different charging cables with all common connector systems gives you flexibility and allows you to charge all batteries directly on your charger without soldering.
| Brand: | Swaytronic |
|---|---|
| Connector plug: | 4mm gold |
| Cross-section stranded wire (AWG): | 12 |
| Material: | Silicone stranded wire |
| Strand length (mm): | 180 - 250 |
| Weight (gr.): | 40 |
Login
December 26, 2020 09:03
Perfekt für meine Anwendung.
December 29, 2016 07:55
TOP und guter Preis!
November 15, 2015 08:11
Tip top. 2cm länger wäre nichts einzuwenden.
Recommendations
Tip
SWAYTRONIC charging cable XT60
SWAYTRONIC charging cable
Application
With the high-quality Swaytronic charging cables you can charge your batteries quickly and safely.
Your advantage
A large selection of different charging cables with all common connector systems gives you flexibility and allows you to charge all batteries directly on your charger without soldering.
Available
Tip
SWAYTRONIC charging cable XT30
SWAYTRONIC charging cable
Application
With the high-quality Swaytronic charging cables you can charge your batteries quickly and safely.
Your advantage
A large selection of different charging cables with all common connector systems gives you flexibility and allows you to charge all batteries directly on your charger without soldering.
Available
Tip
FIREBALLS Fire Protection - Fire Extinguishing Granules 5 litres
FIREBALLS Fire protection fire extinguishing granulate for lithium ion batteries / 5 litres
New and sensational.
This fire extinguishing granulate is the perfect solution for the safe storage and extinguishing of lithium polymer batteries in case of fire.With the fire extinguishing granulate you are also perfectly prepared for all lithium fires in your workshop. If a battery should ignite, you can extinguish it quickly, safely and above all cleanly with the granulate!The granulate is applied softly to the fire. The expanded glass granulate surrounds the fire and smothers it. At particularly high temperatures, the expanded glass melts and spreads over the surface of the burning metal. The melt forms an airtight seal that crusts over as it cools, extinguishing the metal fire. A reignition is effectively prevented.The fire extinguishing granulate is suitable for class D and lithium ion fire loads. Problematic fire loads such as metal fires, battery fires, lithium fires or flammable liquids can be controlled and extinguished with the granulate without causing extinguishing agent damage.The extinguishing effect of the granulate on metal fires was tested and confirmed by the MPA Dresden using a sodium and magnesium fire.
Product features
Forms a protective layerDisplaces oxygenEnvironmentally friendlyResistant to ageingLow weightEasy to handleRetrofittable and maintenance-freeVery good liquid bindingAcid and alkali resistant100% inorganic Inert, low-reactionLow weight (low landfill costs of contaminated material)Low heat conductionSound-absorbingNon-perishableBacteria- and germ-free
Technical data
Supplied in sealed plastic bagCapacity=5 litresBall size=1 to 4mmWeight with packaging=1.2kgPackaging/dimensions = 345x145mm
Available
Tip
LiPo voltage tester 1S - 8S digital and programmable
LiPo voltage tester 1S - 8S digital and programmable
This voltage tester shows you the condition of your battery or cells within seconds.
1-8S Lipo / Li-ion / LiMn / Li-Fe.Voltage detection Accuracy: ± 0.01 V1S test mode Voltage range: 4-15VLow voltage alarm mode for 2-8SAlarm set point range: Off 2.7-3.8VWeight: 9g
Functions:
Display total voltage (all cells) and the individual voltage of each cell.During operation / use of a LiPo battery, the battery tester monitors the battery. The individual cells are permanently checked for their voltage and the alarm is automatically triggered when the set cell voltage of the cells is reached / undercut.Connect a battery (1-8 cells LiPo) to the balance plug of the battery tester. The voltage tester acknowledges the connection of the battery with 2 x 5 beeps. The display shows the total voltage (ALL) of the battery in volts and then changes to the voltage of the individual cells (No 1...No 2... No 3... etc.)
Setting the alarm for the cell voltage you want:
Press the button (lower edge button) once. The tester shows the currently set voltage value in volts (based on 1 cell). If this value corresponds to your wish, the programming is finished and the battery tester changes back to the home position in the display.If you want to change the alarm value, press the button twice. The battery tester switches to the next possible value.Repeat this step until the setting you want is displayed.
Programme options:
OFF / 2.70 V to 3.8 V at intervals of 0.10VPress the button once =display the set alarm valuePress the button twice=switch to the next valuePress the button several times to scroll through all values.
Recommendation:The alarm value should not be set below 3.3 volts! LiPo batteries react very sensitively to deep discharge.
Available
High quality 3in1 battery balancer / discharger / Z
High quality 3in1 battery balancer / discharger / cell monitor
This balancer can be used for Lipo and LiFe batteries. It measures the cell condition and can be used as a balancer to optimally balance the cells. In discharge mode, the cells can also be prepared for winter storage, for example.The cell charge status is displayed during the entire balancing process. This means that faulty cells can also be detected quickly before a crash is risked in flight.Supported battery types: Li-Polymer / Li-Fe:2 - 6 cells / 7.4V -22.2V
Balance Setting Range (lower limit) : 2V - 4.2V (preset with 3.3V)
Discharge Setting Range (lower limit) : 2V - 4.2V (preset with 3.9V)
Available
Tip
SWAYTRONIC LiPo SAFE-BAG red
Swaytronic LiPo SAFE-BAG
Protect yourself and your surroundings with the Swaytronic LiPo-Safe Bag.Made from fireproof material for optimum initial protection.
ATTENTION
The Lipo Safe Bag is designed to provide initial protection in the event of a battery fire. These products are not suitable for long-term storage of LiPos and accumulators. For a storage solution, Swaytronic recommends the LiPo Safe Case.
Available
Tip
SWAYTRONIC LiPo SAFE-BAG white
Swaytronic LiPo SAFE-BAG
Protect yourself and your surroundings with the Swaytronic LiPo-Safe Bag.Made from fireproof material for optimum initial protection.
ATTENTION
The Lipo Safe Bag is designed to provide initial protection in the event of a battery fire. These products are not suitable for long-term storage of LiPos and accumulators. For a storage solution, Swaytronic recommends the LiPo Safe Case.
Available
Tip
SWAYTRONIC Charge Marker (2 pieces)
Swaytronic Charge Marker (2pcs.)
Charge Marker - manual charge level indicator red/greenWho doesn't know the problem of losing track of the charge level with many batteries? The solution now comes in the form of the small and ingenious Charge Marker. The Charge Marker can be
the Charge Marker can be attached directly to the battery using an integrated adhesive strip and can be used immediately.
Slide the slider to green after charging. After use, simply switch the slider back to red. This way you'll never lose control of the charge level of your batteries again and you'll always be ready for another flight!
Available
SWAYTRONIC LiPo Safe Case
Swaytronic LiPo Safe-Case
It is here! The new LiPo Safe Case from Swaytronic. The first case with 99.9% protectionagainst the spread of a battery fire. A GAME CHANGER and the solution for storing and transporting lithium batteries of all kinds.
SAFETY - FIRST!
What makes this case so special?
Fire protection cushion
By using special fire protection pads, the battery fire is greatly contained shortly after it starts. Due to the heat of the battery fire, the material of the fire protection cushion fuses with the lithium accumulator and suffocates it shortly after it starts.
Pressure relief valve
The fire creates overpressure in the case. The built-in valve relieves this pressure
Certification
The case is certified according to UN3480/81 and UN3090/91 and can be used for the transport/storage of intact or damaged lithium - accumulators
Specifications:
Approval until: The LiPo Safe Case is approved for storage and transport up to 750WhDimensions: Outside 510x420x150mm (LxWxH) Inside 475x350x130mm (LxWxH)Weight: 6kg
Your advantages:
- Certified up to 750Wh- 30-year warranty- Water-dust proof according to IP67 - Temperature stable- Extremely robust- Rubberised carrying handle- Easy-to-open locks- Stackable- Two eyelets for padlocks (Ø 7 mm)- Airworthy
Available
Tip
SWAYTRONIC LiPo SAFE-BAG black
Swaytronic LiPo SAFE-BAG
Protect yourself and your surroundings with the Swaytronic LiPo-Safe Bag.Made from fireproof material for optimum initial protection.
ATTENTION
The Lipo Safe Bag is designed to provide initial protection in the event of a battery fire. These products are not suitable for long-term storage of LiPos and accumulators. For a storage solution, Swaytronic recommends the LiPo Safe Case.
Available