SWAYTRONIC - Solar panel flexible 100Watt ETFE
Tip
Order until 15:00 (Local time Europe/Zurich) and your selection will most likely be shipped today.
SWAYTRONIC
SWAYTRONIC - Solar panel flexible 100Watt ETFE
Solar cell type:
Monocrystalline
Measures:
1200x540x2 mm
Weight:
4.1
Kg.
Product number:
7640182624965
Availability:
Available
Delivery Time:
1 - 2 days
CHF 214.70*
Accessories
Please select here conveniently other products from Accessories and Similar items and add them to your order by clicking on the shopping cart in the desired quantity.
Product information "SWAYTRONIC - Solar panel flexible 100Watt ETFE"
SWAYTRONIC - Solar panel flexible 100Watt
The advantages at a glance:
- Semi-flexible solar panel for stationary as well as mobile use
- Monocrystalline solar cells with a high efficiency of 21.6%
- Low installation height of 3mm (without connection box)
The semi-flexible solar panels from Swaytronic are equipped with monocrystalline solar cells with a high efficiency of 21.6%.
Due to the flexibility and the low installation height of 3mm, the solar panels from Swaytronic can be easily mounted (glued/screwed) even in tight spaces and on curved surfaces.
The range of application is in the stationary as well as mobile area. Can be used for caravans, boats, summer houses, island systems, etc. . The connection box is IP65 protected and therefore dustproof and protected against water jets from any angle.
The connection cables are equipped with commercially available MC4-compatible plugs/couplings.
A series connection of the panels up to 700V is possible and the solar panels can be connected in parallel to increase the output.
In combination with a solar charge controller and a storage battery (LiFePO4) from Swaytronic, a self-sufficient energy system can be realised without much prior knowledge.
Please note:
Mounting of flexible solar panels and ABS solar mounting systems
Swaytronic offers tested and verified adhesive sets for bonding flexible solar panels and ABS solar mounting systems.
SWAYTRONIC Adhesive Set-Solar V1 Article No. 7640370541517
SWAYTRONIC Adhesive Set-Solar V2 Article No. 7640370541524
Damage and consequences due to incorrect bonding and mounting procedures, as well as due to the use of materials not verified by Swaytronic - are generally excluded from any warranty and compensation claims.
Scope of delivery:
1 x Solar panel flexible 100W
| Brand: | Swaytronic |
|---|---|
| Current at Pmax (Imp): | 5.55 |
| Height (mm): | 2 |
| Length (mm): | 1200 |
| Maximum power (Pmax) in watts: | 100 |
| Open system voltage (Voc): | 22.7 |
| Operating temperatures (°C): | -40 - +85 |
| Protection: | IP65 |
| Short circuit current (Isc): | 5.82 |
| Solar cell type: | Monocrystalline |
| Voltage at Pmax (Vmp): | 18 |
| Weight (gr.): | 2300 |
| Width (mm): | 540 |
Login
Warranty solar panel / mobile energy
Warranty solar panel / mobile energy
Swaytronic assumes a voluntary manufacturer's warranty of 2 or a maximum of 5 years* for the solar panel product portfolio with exceptions. The effective warranty period can be found in the respective product. The choice of replacement, repair or reimbursement of costs is at the discretion of Swaytronic (Schweiz) AG.
*For more detailed information and allocations, please refer to the corresponding data sheets / product specifications.
Further claims, especially for compensation of direct or indirect damages caused by the defect of the device, the costs incurred by the removal and installation or the lost profit are excluded.
Models which are equipped with a serial number will be recorded by us upon receipt and dispatch of goods and assigned to the end customer.
Removing the serial number (sticker/inscription) will void the warranty.
Mounting of flexible solar panels and ABS solar mounting systems
Swaytronic offers tested and verified adhesive sets for bonding the flexible solar panel and ABS solar mounting systems.
SWAYTRONIC Adhesive Set-Solar V1 Article no. 7640370541517
SWAYTRONIC Adhesive Set-Solar V2 Article no. 7640370541524
Damage and consequences due to improper procedure of bonding and assembly, as well as due to use of materials not verified by Swaytronic - are generally excluded from any warranty and compensation claims.
Exclusion:
Not covered by warranty are damages, defects and malfunctions caused by:
(a) force majeure (e.g. lightning, overvoltage, thunderstorm, flood, fire).
b) normal wear and tear
c) mechanical impact or force such as transport damage, fall, deformation,
d) improper, abusive or negligent handling or use,
e) faulty installation or commissioning
f) malfunction of other connected devices,
g) non-observance of safety precautions,
h) Independent modifications, programming or repairs,
i) use not in accordance with the operating instructions or otherwise improper handling of the goods.
In addition, normal wear and tear or other defects do not affect the basic operation of the product.
External scratches, stains or natural mechanical wear and tear do not constitute a defect of the product.
You can find the complete warranty conditions in our AGB`s:
Recommendations
Tip
SWAYTRONIC - Solar panel flexible 200Watt ETFE
SWAYTRONIC - Solar panel flexible 200Watt
The advantages at a glance:
- Semi-flexible solar panel for stationary as well as mobile use- Monocrystalline solar cells with a high efficiency of 21.6%- Low installation height of 3mm (without connection box)The semi-flexible solar panels from Swaytronic are equipped with monocrystalline solar cells with a high efficiency of 21.6%. Due to the flexibility and the low installation height of 3mm, the solar panels from Swaytronic can be easily mounted (glued/screwed) even in tight spaces and on curved surfaces.The range of application is in the stationary as well as mobile area. Can be used for caravans, boats, summer houses, island systems, etc. . The connection box is IP65 protected and therefore dustproof and protected against water jets from any angle.The connection cables are equipped with commercially available MC4-compatible plugs/couplings. A series connection of the panels up to 700V is possible and the solar panels can be connected in parallel to increase the output.In combination with a solar charge controller and a storage battery (LiFePO4) from Swaytronic, a self-sufficient energy system can be realised without much prior knowledge.Please note:Mounting of flexible solar panels and ABS solar mounting systemsSwaytronic offers tested and verified adhesive sets for bonding flexible solar panels and ABS solar mounting systems. SWAYTRONIC Adhesive Set-Solar V1 Article No. 7640370541517 SWAYTRONIC Adhesive Set-Solar V2 Article No. 7640370541524Damage and consequences due to incorrect bonding and mounting procedures, as well as due to the use of materials not verified by Swaytronic - are generally excluded from any warranty and compensation claims.
Scope of delivery:
1 x Solar panel flexible 200W
on customer order
Tip
SWAYTRONIC - Solar panel flexible 250Watt ETFE
SWAYTRONIC - Solar panel flexible 250Watt
The advantages at a glance:
- Semi-flexible solar panel for stationary as well as mobile use- Monocrystalline solar cells with a high efficiency of 21.6%- Low installation height of 3mm (without connection box)The semi-flexible solar panels from Swaytronic are equipped with monocrystalline solar cells with a high efficiency of 21.6%. Due to the flexibility and the low installation height of 3mm, the solar panels from Swaytronic can be easily mounted (glued/screwed) even in tight spaces and on curved surfaces.The range of application is in the stationary as well as mobile area. Can be used for caravans, boats, summer houses, island systems, etc. . The connection box is IP65 protected and therefore dustproof and protected against water jets from any angle.The connection cables are equipped with commercially available MC4-compatible plugs/couplings. A series connection of the panels up to 700V is possible and the solar panels can be connected in parallel to increase the output.In combination with a solar charge controller and a storage battery (LiFePO4) from Swaytronic, a self-sufficient energy system can be realised without much prior knowledge.Please note:Mounting of flexible solar panels and ABS solar mounting systemsSwaytronic offers tested and verified adhesive sets for bonding flexible solar panels and ABS solar mounting systems. SWAYTRONIC Adhesive Set-Solar V1 Article No. 7640370541517 SWAYTRONIC Adhesive Set-Solar V2 Article No. 7640370541524Damage and consequences due to incorrect bonding and mounting procedures, as well as due to the use of materials not verified by Swaytronic - are generally excluded from any warranty and compensation claims.
Scope of delivery:
1 x Solar panel flexible 250W
on customer order
Tip
SWAYTRONIC - Solar panel flexible 150Watt V2 ETFE
SWAYTRONIC - Solar panel flexible 150Watt
The advantages at a glance:
- Semi-flexible solar panel for stationary as well as mobile use- Monocrystalline solar cells with a high efficiency of 21.6%- Low installation height of 3mm (without connection box)The semi-flexible solar panels from Swaytronic are equipped with monocrystalline solar cells with a high efficiency of 21.6%. Due to the flexibility and the low installation height of 3mm, the solar panels from Swaytronic can be easily mounted (glued/screwed) even in tight spaces and on curved surfaces.The range of application is in the stationary as well as mobile area. Can be used for caravans, boats, summer houses, island systems, etc. . The connection box is IP65 protected and therefore dustproof and protected against water jets from any angle.The connection cables are equipped with commercially available MC4-compatible plugs/couplings. A series connection of the panels up to 700V is possible and the solar panels can be connected in parallel to increase the output.In combination with a solar charge controller and a storage battery (LiFePO4) from Swaytronic, a self-sufficient energy system can be realised without much prior knowledge.Please note:Mounting of flexible solar panels and ABS solar mounting systemsSwaytronic offers tested and verified adhesive sets for bonding flexible solar panels and ABS solar mounting systems. SWAYTRONIC Adhesive Set-Solar V1 Article No. 7640370541517 SWAYTRONIC Adhesive Set-Solar V2 Article No. 7640370541524Damage and consequences due to incorrect bonding and mounting procedures, as well as due to the use of materials not verified by Swaytronic - are generally excluded from any warranty and compensation claims.
Scope of delivery:
1 x Solar panel flexible 150W
on customer order
Tip
SWAYTRONIC - Solar panel flexible 150Watt ETFE
SWAYTRONIC - Solar panel flexible 150Watt
The advantages at a glance:
- Semi-flexible solar panel for stationary as well as mobile use- Monocrystalline solar cells with a high efficiency of 21.6%- Low installation height of 3mm (without connection box)The semi-flexible solar panels from Swaytronic are equipped with monocrystalline solar cells with a high efficiency of 21.6%. Due to the flexibility and the low installation height of 3mm, the solar panels from Swaytronic can be easily mounted (glued/screwed) even in tight spaces and on curved surfaces.The range of application is in the stationary as well as mobile area. Can be used for caravans, boats, summer houses, island systems, etc. . The connection box is IP65 protected and therefore dustproof and protected against water jets from any angle.The connection cables are equipped with commercially available MC4-compatible plugs/couplings. A series connection of the panels up to 700V is possible and the solar panels can be connected in parallel to increase the output.In combination with a solar charge controller and a storage battery (LiFePO4) from Swaytronic, a self-sufficient energy system can be realised without much prior knowledge.Please note:Mounting of flexible solar panels and ABS solar mounting systemsSwaytronic offers tested and verified adhesive sets for bonding flexible solar panels and ABS solar mounting systems. SWAYTRONIC Adhesive Set-Solar V1 Article no. 7640370541517 SWAYTRONIC Adhesive Set-Solar V2 Article no. 7640370541524Damage and consequences due to incorrect bonding and mounting procedures, as well as due to the use of materials not verified by Swaytronic - are generally excluded from any warranty and compensation claims.
Scope of delivery:
1 x Solar panel flexible 150W
Available
Tip
SWAYTRONIC - Solar parallel circuit type 1
SWAYTRONIC - Solar parallel circuit type 1
Swaytronic Solar Parallel Circuit Type 1 IP 67 Compatible with MC4 connector system Swaytronic recommends using only plugs and couplings from the same manufacturer.
Scope of delivery:
1 x parallel circuit (W)1 x parallel circuit (M)
Available
SWAYTRONIC - Adhesive set-Solar V1
Swaytronic Adhesive Set-Solar V1
Correct and strong bonding for brackets and complete solar panels is very important so that the panels do not detach from the substrate while driving, which could result in high consequential damage. The preparation of the substrate is just as important as the adhesive. The substrate and the material to be bonded must be properly prepared so that the mounting adhesive can create a good bond between the two materials. Swaytronic offers you an adhesive kit that contains all the components to correctly mount the brackets or solar panels on virtually any surface. You will also find step-by-step instructions in each adhesive kit. This enables any person without prior knowledge to carry out this process correctly. 1 adhesive set is sufficient for the bonding of 1 x Swaytronic 150W panel flexible
Features:
- All in one bonding set- Includes adhesive, cleaner, primer and lint-free cloths for cleaning and applying primer - Step-by-step instructions for correctly bonding the panel brackets- High-quality products from leading companies in bonding technology
Scope of delivery:
1 x mounting adhesive 290ml (Innotec Adheseal) 1 x cleaner 100ml (Innotec Repaplast Cleaner) 1 x primer 50ml (Innotec Seal Guard) 5 x cleaning/primer cloth (Innotec Multi-Wipes)
Available
Tip
SWAYTRONIC - PV solar cable 4mm² 1 metre
SWAYTRONIC - PV solar cable 4mm²
Please add quantity/metre to shopping cart
Available
Tip
SWAYTRONIC - Solar parallel circuit type 2
SWAYTRONIC - Solar parallel circuit type 2
Swaytronic Solar Parallel Circuit Type 1 IP 67 Compatible with MC4 connector system Swaytronic recommends to use only connectors and couplings of the same manufacturer.
Scope of delivery:
1 x parallel circuit (W)1 x parallel circuit (M)
Available
SWAYTRONIC - Junction Box-Solar Double (b)
Swaytronic connection box double ABS (black)
Connection box for the clean roof feed-through of solar cables.Suitable for solar cable cross-sections of 2.5mm² - 6mm²Dimensions: 110mm x 95mm x 45mm (LxWxH)
Scope of delivery:
1 x connection box double
For fixing the brackets Swaytronic recommends the glue set V1 (item no. 7640370541517 )
Available
SWAYTRONIC - Adhesive Set-Solar V2
Swaytronic Adhesive Set-Solar V2
Correct and strong bonding for brackets and complete solar panels is very important so that the panels do not detach from the substrate while driving, which could result in high consequential damage. The preparation of the substrate is just as important as the adhesive. The substrate and the material to be bonded must be properly prepared so that the mounting adhesive can create a good bond between the two materials. Swaytronic offers you an adhesive kit that contains all the components to correctly mount the brackets or solar panels on virtually any surface. You will also find step-by-step instructions in each adhesive kit. This enables any person without prior knowledge to carry out this process correctly.In addition to the components of the V1 set, Swaytronic Adhesive Set-Solar V2 contains a spacer tape which ensures the optimum distance between the solar panel and the surface. (Mandatory for flexible solar panels)1 adhesive set is sufficient for bonding 1 x Swaytronic 150W panel flexible
Features:
- All in one bonding set- Includes adhesive, cleaner, primer and lint-free cloths for cleaning and applying the primer - Step by step instructions for correct bonding of the panel brackets- High-quality products from leading companies in bonding technology
Scope of delivery:
1 x mounting adhesive 290ml (Innotec Adheseal) 1 x cleaner 100ml (Innotec Repaplast Cleaner) 10m spacer tape 6mm1 x primer 50ml (Innotec Seal Guard) 5 x cleaning/primer cloth (Innotec Multi-Wipes)
Available
SWAYTRONIC - Junction Box-Solar Double (w)
Swaytronic connection box double ABS (white)
Connection box for the clean roof feed-through of solar cables.Suitable for solar cable cross-sections of 2.5mm² - 6mm²Dimensions: 110mm x 95mm x 45mm (LxWxH)
Scope of delivery:
1 x connection box double
For fixing the brackets Swaytronic recommends the glue set V1 (item no. 7640370541517 )
Available
Tip
SWAYTRONIC - Solar plug-in system (pair)
SWAYTRONIC - Solar connector system (pair)
Swaytronic Solar Plug-in system IP 67 Compatible with MC4 plug-in system Swaytronic recommends only using plugs and couplings from the same manufacturer.
Scope of delivery:
1 x plug-in system circuit (W)1 x plug-in system circuit (M)
Available
Sale %
SWAYTRONIC - Energy Station 80Ah 1000W
Swaytronic Energy-Station 80Ah 1000W AC
Ultimate power and performance. - Uncompromising quality.
The Swaytronic Energy-Station is designed to provide the end user with a complete outdoor power solution covering all applications from 12V to 230V AC with 1000W pure sine wave inverter. The built-in LiFePO4 battery ensures a long, independent power supply with comparatively low weight.
The highlights:
LiFePO4 technology
All our Energy Stations are equipped with lithium iron phosphate technology - the main advantage of these battery cells is their significantly longer service life compared to other lithium technologies.Many comparable Energystation have a lifetime of 600-800 cycles at 80% remaining capacity. Our LiFePO4 cells achieve 2500 cycles with the same use.Furthermore, lithium iron phosphate technology is currently the safest lithium technology on the market. Thermal runaway (fire) is almost impossible.
230V AC Connection with 1000W continuous power and pure sine wave
You can charge or operate your devices, be it a coffee machine or your notebook, via the integrated 230V connection.
Grounding option via external grounding spike. The operation of 3-pole devices is safe compared to similar 230V Energy/Power- stations without built-in protective function.
12V Anderson connections with a capacity of up to 175A
The grey Anderson connections allow you to connect 12V loads directly to the Energystation. Do you want to operate a parking heater in your camper or connect other powerful consumers? With the Anderson connections, you are guaranteed to be able to supply any 12V application.
USB QC 3.0 and Type-C + cigarette plug socket
With the integrated USB QC 3.0 and Type-C ports, you can recharge your smartphone/tablet and many other smart devices quickly and easily. With the cigarette plug socket, you have the option of connecting your air pump for the inflatable boat or other devices with a cigarette plug.
Jump-start function
The Anderson high-current connection allows you to connect the jump-start cable with alligator clips (included in the scope of delivery) directly and thus jump-start your vehicle.
Capacity expansion with additional battery packs
The Swaytronic Energy Station can be expanded modularly with additional Battery Packs via the high-current connection . The main station is connected directly to the additional Battery Pack with a cable. No screwing - just plug inThe additional Battery Packs are offered in two versions. 80Ah/120Ah. This means that the capacity can be individually adapted to the application. The extension is offered for 1, 2 or one modular extension quantity
Scope of delivery:
1x Energy Station 12.8V 80Ah1x AC 230V charger with 20A1x Jumper cable with 175A high-current Anderson connector1x Pre-assembled connection cable with 50A Anderson connector1x Fastening set for mounting in the vehicle1x Cover caps for the Anderson connectors1x Operating instructions
Available
5
Sale %
SWAYTRONIC - Solar charge controller DR1206N-DDS 10A
SWAYTRONIC - Solar charge controller DR1206N-DDS 10A
The DuoRacer MPPT charge controller is used to charge two batteries simultaneously.In this way, the supply battery and the starter battery can be charged simultaneously during operation.This controller supports sealed, gel, flooded, LiFePO4 and Li-NiCoMn batteries.The unit detects the system voltage of the starter battery and automatically switches to trickle charge.The controller uses the advanced MPPT control algorithm that detects the maximum power point while minimising power loss.The performance with MPPT technology is increased by 20-30% compared to the PWM charging method.If there is no manual operation for a long time and the charging conditions cannot be achieved, the controller will switch to energy saving mode, which reduces the loss and waste of battery power to extend the life of the products.System settings are indicated by the LED and LCD display and can be enhanced by the optional external MT11 display (accessory).The AES control signal of the auto-refrigerator is built into the controller, which supplies the refrigerator with excess solar energy and maximises efficiency.The controller has IP33 protection.Numerous protection functions such as battery overcharge protection, overdischarge protection and reverse polarity protection of the PV and battery are integrated in the unit.
Features:
- Maximum power point tracking technology with ultra-fast tracking speed and tracking efficiency of at least 99.5%- Advanced MPPT control algorithm to minimise MPPlost rate- Wider range of MPP operating voltage to improve PV module utilisation- Automatic control function for charging power and charging current limitation (BATT1)- Digital circuit control of adaptive three-stage charging mode to extend the life of BATT1.- The type of BATT1 can be set via LED / LCD.- The product will be put into energy saving mode if there is no manual operation for a long time and the charging conditions are not efficient- AES control signal for car refrigerator to avoid energy waste.- Standard Modbus protocol and RS485 communication port (5 V / 200 mA) to extend the application range
Scope of delivery:
1 x SWAYTRONIC - Solar charge controller DR1206N-DDS 10A1 x Operating instructions
Available
15
SWAYTRONIC - Energy Station 120Ah 1000W
Swaytronic Energy Station 120Ah 1000W AC
Ultimate power and performance. - Uncompromising quality.
The Swaytronic Energy-Station is designed to provide the end user with a complete outdoor power solution covering all applications from 12V to 230V AC with 1000W pure sine wave inverter. The built-in LiFePO4 battery ensures a long, independent power supply with comparatively low weight.
The highlights:
LiFePO4 technology
All our Energy Stations are equipped with lithium iron phosphate technology - the main advantage of these battery cells is their significantly longer service life compared to other lithium technologies.Many comparable Energystation have a lifetime of 600-800 cycles at 80% remaining capacity. Our LiFePO4 cells achieve 2500 cycles with the same use.Furthermore, lithium iron phosphate technology is currently the safest lithium technology on the market. Thermal runaway (fire) is almost impossible.
Integrated solar charge controller
The Energy Station from Swaytronic is equipped with an integrated MPPT solar charge controller . Solar panels with up to 250W and 50V open system voltage (VOC) can be connected directly. This allows you to recharge your Energystation Plug&Play via a solar panel.
230V AC connection with 1000W continuous power and pure sine wave
You can charge or operate your devices, be it a coffee machine or your notebook, via the integrated 230V connection.
Grounding option via external grounding spike. The operation of 3-pole devices is safe compared to similar 230V Energy/Power- stations without built-in protective function.
12V Anderson connections with a capacity of up to 175A
The grey Anderson connections allow you to connect 12V loads directly to the Energystation. Do you want to operate a parking heater in your camper or connect other powerful consumers? With the Anderson connections, you are guaranteed to be able to supply any 12V application.
USB QC 3.0 and Type-C + cigarette plug socket
With the integrated USB QC 3.0 and Type-C ports, you can quickly and easily recharge your smartphone/tablet and many other smart devices. With the cigarette plug socket, you have the option of connecting your air pump for the inflatable boat or other devices with a cigarette plug.
Jump-start function
The Anderson high-current connection allows you to connect the jump-start cable with alligator clips (included in the scope of delivery) directly and thus jump-start your vehicle.
Capacity expansion with additional battery packs
The Swaytronic Energy Station can be expanded modularly with additional Battery Packs via the high-current connection . The main station is connected directly to the additional Battery Pack with a cable. No screwing - just plug it inThe additional Battery Packs are offered in two versions. 80Ah/120Ah. This means that the capacity can be individually adapted to the application. The extension is offered for 1, 2 or one modular extension quantity
Scope of delivery:
1x Energy Station 12.8V 120Ah1x AC 230V charger with 20A1x Jumper cable with 175A high-current Anderson connector1x Pre-assembled connection cable with 50A Anderson connector1x Fastening set for mounting in the vehicle1x Cover caps for the Anderson connectors1x Operating instructions
Available
SWAYTRONIC - Energy Station 150Ah 2500W
Swaytronic Energy Station 150Ah 2500W AC
Ultimate power and performance. - Uncompromising quality.
The Swaytronic Energy-Station is designed to provide the end user with a complete outdoor power solution covering all applications from 12V to 230V AC with 2500W pure sine wave inverter. The built-in LiFePO4 battery ensures a long, independent power supply with comparatively low weight.
The highlights:
LiFePO4 technology
All our Energy Stations are equipped with lithium iron phosphate technology - the main advantage of these battery cells is their significantly longer service life compared to other lithium technologies.Many comparable Energystation have a lifetime of 600-800 cycles at 80% remaining capacity. Our LiFePO4 cells achieve 2500 cycles with the same use.Furthermore, lithium iron phosphate technology is currently the safest lithium technology on the market. Thermal runaway (fire) is almost impossible.
Integrated solar charge controller and charge booster
The Energy-Station from Swaytronic is equipped with an integrated MPPT solar charge controller and charge booster. 30A solar up to 400W / 25V open system voltage (VOC) and 30A charge booster. This allows you to recharge your Energystation Plug&Play via a solar panel or the vehicle's alternator with up to 30A.
2 x 230V AC connection with 2500W continuous power and pure sine wave
You can operate your appliances, be it a coffee machine or an induction hob, or even charge your notebook via the integrated 230V connections.
Maximum safety thanks to integrated residual-current circuit breaker and external earthing spike. The operation of 3-pole devices is safe compared to similar 230V Energy/Power- stations without built-in protection functions.
12V Anderson connections with a capacity of up to 175A
The grey Anderson connections allow you to connect 12V loads directly to the Energystation. Do you want to operate a parking heater in your camper or connect other powerful consumers? With the Anderson connections, you are guaranteed to be able to supply any 12V application.
USB QC 3.0 and Type-C + cigarette plug socket
With the integrated USB QC 3.0 and Type-C ports, you can quickly and easily recharge your smartphone/tablet and many other smart devices. With the cigarette plug socket, you have the option of connecting your air pump for the inflatable boat or other devices with a cigarette plug.
Jump-start function
The Anderson high-current connection allows you to connect the jump-start cable with alligator clips (included in the scope of delivery) directly and thus jump-start your vehicle.
Capacity expansion with additional battery packs
The Swaytronic Energy Station can be expanded modularly with additional Battery Packs via the high-current connection . The main station is connected directly to the additional Battery Pack with a cable. No screwing - just plug it inThe additional Battery Packs are offered in two versions. 80Ah/120Ah. This means that the capacity can be individually adapted to the application. The extension is offered for 1, 2 or one modular extension quantity
Scope of delivery:
1x Energy Station 12.8V 150Ah1x AC 230V charger with 20A1x Jumper cable with 175A high-current Anderson connector1x Pre-assembled connection cable with 50A Anderson connector1x Fastening set for mounting in the vehicle1x Cover caps for the Anderson-Connections1x Wattmeter for checking the power at the DC outputs1x Solar connection cable with MC4 compatible plug1x D+ connection cable for the charging connection on the alternator1x Separate Anderson plug set
1x Operating instructions
Available