SWAYTRONIC LiFePO4 12.8V 100Ah Starter Battery
Order until 15:00 (Local time Europe/Zurich) and your selection will most likely be shipped today.
SWAYTRONIC
SWAYTRONIC LiFePO4 12.8V 100Ah Starter Battery
Watt hours (Wh):
1280
Measures:
355x175x188 mm
Weight:
13.5
Kg.
Product number:
7640370541333
Availability:
Available
Delivery Time:
1 - 2 days
CHF 1,219.00*
Accessories
Please select here conveniently other products from Accessories and Similar items and add them to your order by clicking on the shopping cart in the desired quantity.
Product information "SWAYTRONIC LiFePO4 12.8V 100Ah Starter Battery"
SWAYTRONIC LiFePO4 starter battery 12.8V 100Ah
Ultimate power and performance. - Uncompromising quality.
The starter and supply battery in one - 1200A short-time cold start current - Compatible for cars with automatic start/stop!
Our new battery packs with LiFePO4 technology are aimed at all users who are looking for a mains-independent energy supply. 640Wh to 1920Wh power ensure an individual and self-sufficient power supply.
You are planning:
A solar and energy storage system?
A mobile energy charging supply for your RC batteries?
An independent power supply for your camper?
Another SMART independence in terms of power supply?
Due to the intrinsic safety of the LiFePO4 technology in combination with the internal battery electronics, overcharging, deep discharging and short-circuiting are impossible.
Which is why LiFePO4 is the better choice.
AGM gel lead-acid batteries have been used in Swaytronic LiFePO4 applications for many years and are still used today. These actually have a disadvantage in all respects compared to LiFePO4 technology. The following comparisons show you the advantages of the Swaytronic-LiFePO4 battery compared to conventional AGM packs.
Usable capacity x factor 2
AGM --> 50% LiFePO4 --> 100%
Service life at 50% depth of discharge
AGM --> approx. 800 cycles LiFePO4 --> approx. 5000 cycles
Service life at 90% depth of discharge
AGM --> approx. 400 cycles LiFePO4 --> approx. 3000 cycles
Weight saving up to 40% depth of discharge
AGM 12V 100Ah --> approx. 23kg LiFePO4 12V 100Ah --> approx. 14kg
The comparison.
These advantages also put the price advantage of a lead-gel AGM battery into perspective. Due to the very high cycle stability of a Swaytronic-LiFePO4 accumulator, you will achieve a 7.5x longer service life at 90% discharge depth than with a lead-gel AGM.
And there is more.
Another advantage is that Swaytronic storage batteries can be connected in series up to 4 times and in parallel infinitely . This means you can upgrade your system from 12V standard to 48V or increase the capacity of your system by the capacity you want.
All these advantages offer you a limitless field of application. Whether camping, on the boat, in the alpine hut or simply as an additional power supply on the RC flying field to be able to charge autonomously,
- the storage batteries from Swaytronic make it possible.
In the system/charging combination with our solar panels in the flexible, foldable or rigid range, your energy reserves are also never exhausted.
Scope of delivery:
1 x LiFePO4 12.8V 100Ah
| Brand: | Swaytronic |
|---|---|
| Charging end voltage (V): | 14.6 |
| Charging voltage (V): | 14.4 ±0.2 |
| Connector plug: | Round pole |
| Continuous current load (A): | 100 |
| Design: | Black |
| Discharge end voltage (V): | 9 |
| Discharge temperatures (°C): | -20 - +60 |
| Height (mm): | 188 |
| Length (mm): | 355 |
| Lifetime: | >2000 cycles at 100% discharge, >3000 cycles at 80% discharge |
| Loading procedure: | CC-CV |
| Loading temperatures: | 0°C to 45°C |
| Material housing: | ABS+PV UL V-0 fire resistance |
| Max. Peak current (A): | 1200 |
| Maximum charging current (C): | 1C |
| Nominal capacity (mAh): | 100000 |
| Rated voltage (V): | 12.8 |
| Recommended charging current (A): | 0.2-0.5 |
| Storage temperatures (°C): | -10°C to +35°C |
| Technology: | LiFePO₄ |
| Water-dust resistant housing: | IP56 |
| Watt hours (Wh): | 1280 |
| Weight (gr.): | 12800 |
| Width (mm): | 175 |
Login
Warranty for LiFePo4 Storage Batteries / Mobile Energy
Swaytronic assumes a voluntary manufacturer's warranty of 5 years for the product portfolio storage batteries. The period for calculating the warranty period begins from the date of purchase, but not more than 1 year after manufacture. The warranty period is not extended in case of provision or granting of services within the scope of this warranty, in particular not in case of replacement or repair.
The choice of replacement, repair or reimbursement is at the discretion of Swaytronic (Switzerland) AG.
Devices, models or accumulators which are equipped with a serial number are registered by us at the incoming and outgoing goods and assigned to the end customer.
The removal of the serial number (sticker/inscription) will void the warranty.
Exclusion:
Not covered by the warranty are damages, defects and malfunctions caused by:
(a) force majeure (e.g. lightning, overvoltage, thunderstorm, flood, fire).
b) normal wear and tear
c) mechanical impact or force such as transport damage, fall, deformation,
d) improper, abusive or negligent handling or use,
e) faulty installation or commissioning
f) malfunction of other connected devices,
g) non-observance of safety precautions,
h) independent modifications, programming or repairs,
i) use not in accordance with the operating instructions or otherwise improper treatment of the goods.
Further claims, in particular for compensation for direct or indirect damage caused by the defect of the device, the costs incurred by the removal and installation or lost profits, are excluded.
The complete warranty conditions can be found in our AGB`s:
Recommendations
SWAYTRONIC - Core cable 10mm² black/meter goods
SWAYTRONIC - Core cable 10mm² black/1m
Metre goods: Please add desired quantity/metre to shopping cart
Lapp H07 V-K
Fine stranded wire made of bare copper wires according to IEC 60228 Cl.5Core insulation based on PVC, flame retardant according to IEC 60332.1-2Temperature range: -5°C...+70°CRated voltage Uo/U: 450/750 VTest voltage: 2500VStandardisation: CENELEC HD 21.3
Available
Sale %
SWAYTRONIC - Battery display 100A
SWAYTRONIC - Battery display 100A
Application:
The Swaytronic battery monitors enable real-time monitoring of the connected battery.The battery monitors measure the voltage and current (input/output) and use this data to calculate the current SOC (state of charge) of the battery. This value is then displayed as a % value or as Ah residual capacity.The battery monitor can be used with batteries up to 999 Ah capacity. The battery monitor has a memory function so that the data is saved in the event of a power cut.
Areas of application:
The battery monitor can be used for batteries with lithium-iron-phosphate, lead-acid and nickel-metal-hydride technology.Whether caravans, electrically powered vehicles or in ships, it can be used almost anywhere. The Swaytronic battery monitor is designed for battery voltages from 8V - 80V.
Scope of delivery:
1 x battery display
Available
7
Tip
SWAYTRONIC - Core cable 16mm² black/metre goods
SWAYTRONIC - Core cable 16mm² black/1m
Metre goods: Please add desired quantity/metre to shopping cart
Lapp H07 V-K
Fine stranded wire made of bare copper wires according to IEC 60228 Cl.5Core insulation based on PVC, flame retardant according to IEC 60332.1-2Temperature range: -5°C...+70°CRated voltage Uo/U: 450/750 VTest voltage: 2500VStandardisation: CENELEC HD 21.3
Available
SWAYTRONIC - Core cable 25mm² red/metre goods
SWAYTRONIC - Core cable 25mm² red/1m
Metre goods: Please add desired quantity/metre to shopping cart
Lapp H07 V-K
Fine stranded wire made of bare copper wires according to IEC 60228 Cl.5Core insulation based on PVC, flame retardant according to IEC 60332.1-2Temperature range: -5°C...+70°CRated voltage Uo/U: 450/750 VTest voltage: 2500VStandardisation: CENELEC HD 21.3
Available
SWAYTRONIC - Core cable 25mm² black/meter goods
SWAYTRONIC - Core cable 25mm² black/1m
Metre goods: Please add desired quantity/metre to shopping cart
Lapp H07 V-K
Fine stranded wire made of bare copper wires according to IEC 60228 Cl.5Core insulation based on PVC, flame retardant according to IEC 60332.1-2Temperature range: -5°C...+70°CRated voltage Uo/U: 450/750 VTest voltage: 2500VStandardisation: CENELEC HD 21.3
Available
SWAYTRONIC - LiFePO 4 Battery Charger 14.6V 20A
Battery Charger LiFePO4 14.6V/20ADhebattery charger features 3-stage intelligent charging technology with single-chip microcomputer (MCU), which can accurately track the battery charging process and always bring the battery to the best electrochemical reaction state to prolong its life.The control circuit uses advanced high-bridge transformer -LLC half-bridge control technology. The solid housing provides good heat dissipation and improves the efficiency of the charger.
Applications:
Chargers of this series are used for charging 4S-12.8V lithium batteries on LiFePO4 technology
Scope of delivery:
1 x Charger 1 x Mains cable1 x Operating instructions
Available
SWAYTRONIC - Core cable 10mm² red/meter goods
SWAYTRONIC - Core cable 10mm² red/1m
Metre goods: Please add desired quantity/metre to shopping cart
Lapp H07 V-K
Fine stranded wire made of bare copper wires according to IEC 60228 Cl.5Core insulation based on PVC, flame retardant according to IEC 60332.1-2Temperature range: -5°C...+70°CRated voltage Uo/U: 450/750 VTest voltage: 2500VStandardisation: CENELEC HD 21.3
Available
SWAYTRONIC - LiFePO 4 Battery Charger 58.4V 20A
Battery Charger LiFePO4 58.4V/20A
The battery charger features 3-stage intelligent charging technology with single-chip microcomputer (MCU), which can accurately track the battery charging process and always bring the battery to the best electrochemical reaction state to prolong its life.The control circuit uses advanced high-bridge transformer -LLC half-bridge control technology. The solid housing provides good heat dissipation and improves the efficiency of the charger.
Applications:
Chargers of this series are used for charging 16S-51.2V lithium batteries on LiFePO4 technology
Scope of delivery:
1 x Charger 1 x Mains cable1 x Operating instructions
Available
SWAYTRONIC - LiFePO 4 Battery Charger 29.2V 20A
Battery Charger LiFePO4 29.2V/20A
The battery charger features 3-stage intelligent charging technology with single-chip microcomputer (MCU), which can accurately track the battery charging process and always bring the battery to the best electrochemical reaction state to prolong its life.The control circuit uses advanced high-bridge transformer -LLC half-bridge control technology. The solid housing provides good heat dissipation and improves the efficiency of the charger.
Applications:
Chargers of this series are used for charging 8S-25.6V lithium batteries on LiFePO4 technology
Scope of delivery:
1 x Charger 1 x Mains cable1 x Operating instructions
Available
Tip
SWAYTRONIC - Core cable 35mm² black/meter goods
SWAYTRONIC - Core cable 35mm² black/1m
Metre goods: Please add desired quantity/metre to shopping cart
Lapp H07 V-K
Fine stranded wire made of bare copper wires according to IEC 60228 Cl.5Core insulation based on PVC, flame retardant according to IEC 60332.1-2Temperature range: -5°C...+70°CRated voltage Uo/U: 450/750 VTest voltage: 2500VStandardisation: CENELEC HD 21.3
Available
SWAYTRONIC - LiFePO 4 Battery Charger 14.6V 40A
Battery Charger LiFePO4 14.6V/40A
The battery charger features 3-stage intelligent charging technology with single-chip microcomputer (MCU), which can accurately track the battery charging process and always bring the battery to the best electrochemical reaction state to prolong its life.The control circuit uses advanced high-bridge transformer -LLC half-bridge control technology. The solid housing provides good heat dissipation and improves the efficiency of the charger.
Applications:
Chargers of this series are used for charging 4S-12.8V lithium batteries on LiFePO4 technology
Scope of delivery:
1 x Charger 1 x Mains cable1 x Operating instructions
Available
Tip
SWAYTRONIC - Core cable 16mm² red/metre goods
SWAYTRONIC - Core cable 16mm² red/1m
Metre goods: Please add desired quantity/metre to shopping cart
Lapp H07 V-K
Fine stranded wire made of bare copper wires according to IEC 60228 Cl.5Core insulation based on PVC, flame retardant according to IEC 60332.1-2Temperature range: -5°C...+70°CRated voltage Uo/U: 450/750 VTest voltage: 2500VStandardisation: CENELEC HD 21.3
Available
Tip
SWAYTRONIC - Core cable 35mm² red/metre goods
SWAYTRONIC - Core cable 35mm² red/1m
Metre goods: Please add desired quantity/metre to shopping cart
Lapp H07 V-K
Fine stranded wire made of bare copper wires according to IEC 60228 Cl.5Core insulation based on PVC, flame retardant according to IEC 60332.1-2Temperature range: -5°C...+70°CRated voltage Uo/U: 450/750 VTest voltage: 2500VStandardisation: CENELEC HD 21.3
Available
Sale %
SWAYTRONIC - Battery display 50A
SWAYTRONIC - Battery display 50A
Application:
The Swaytronic battery monitors enable real-time monitoring of the connected battery.The battery monitors measure the voltage and current (input/output) and use this data to calculate the current SOC (state of charge) of the battery. This value is then displayed as a % value or as Ah residual capacity.The battery monitor can be used with batteries up to 999 Ah capacity. The battery monitor has a memory function so that the data is saved in the event of a power cut.
Areas of application:
The battery monitor can be used for batteries with lithium-iron-phosphate, lead-acid and nickel-metal-hydride technology.Whether caravans, electrically powered vehicles or in ships, it can be used almost anywhere. The Swaytronic battery monitor is designed for battery voltages from 8V - 80V.
Scope of delivery:
1 x battery display
Available
6
Sale %
SWAYTRONIC - Battery display-R 50A
SWAYTRONIC - Battery display 50A
Application:
The Swaytronic battery monitors enable real-time monitoring of the connected battery.The battery monitors measure the voltage and current (input/output) and use this data to calculate the current SOC (state of charge) of the battery. This value is then displayed as a % value or as Ah residual capacity.The battery monitor can be used with batteries up to 999 Ah capacity. The battery monitor has a memory function so that the data is saved in the event of a power cut.
Areas of application:
The battery monitor can be used for batteries with lithium-iron-phosphate, lead-acid and nickel-metal-hydride technology.Whether caravans, electrically powered vehicles or in ships, it can be used almost anywhere. The Swaytronic battery monitor is designed for battery voltages from 8V - 80V.
Scope of delivery:
1 x battery display
Available
9
SWAYTRONIC - Battery display-R 100A
SWAYTRONIC - Battery display 100A
Application:
The Swaytronic battery monitors enable real-time monitoring of the connected battery.The battery monitors measure the voltage and current (input/output) and use this data to calculate the current SOC (state of charge) of the battery. This value is then displayed as a % value or as Ah residual capacity.The battery monitor can be used with batteries up to 999 Ah capacity. The battery monitor has a memory function so that the data is saved in the event of a power cut.
Areas of application:
The battery monitor can be used for batteries with lithium-iron-phosphate, lead-acid and nickel-metal-hydride technology.Whether caravans, electrically powered vehicles or in ships, it can be used almost anywhere. The Swaytronic battery monitor is designed for battery voltages from 8V - 80V.
Scope of delivery:
1 x battery display
Available
SWAYTRONIC - LiFePO 4 Battery Charger 14.6V 40A
Battery Charger LiFePO4 14.6V/40A
The battery charger features 3-stage intelligent charging technology with single-chip microcomputer (MCU), which can accurately track the battery charging process and always bring the battery to the best electrochemical reaction state to prolong its life.The control circuit uses advanced high-bridge transformer -LLC half-bridge control technology. The solid housing provides good heat dissipation and improves the efficiency of the charger.
Applications:
Chargers of this series are used for charging 4S-12.8V lithium batteries on LiFePO4 technology
Scope of delivery:
1 x Charger 1 x Mains cable1 x Operating instructions
Available
SWAYTRONIC - LiFePO 4 Battery Charger 14.6V 20A
Battery Charger LiFePO4 14.6V/20ADhebattery charger features 3-stage intelligent charging technology with single-chip microcomputer (MCU), which can accurately track the battery charging process and always bring the battery to the best electrochemical reaction state to prolong its life.The control circuit uses advanced high-bridge transformer -LLC half-bridge control technology. The solid housing provides good heat dissipation and improves the efficiency of the charger.
Applications:
Chargers of this series are used for charging 4S-12.8V lithium batteries on LiFePO4 technology
Scope of delivery:
1 x Charger 1 x Mains cable1 x Operating instructions
Available
SWAYTRONIC - LiFePO 4 Battery Charger 29.2V 20A
Battery Charger LiFePO4 29.2V/20A
The battery charger features 3-stage intelligent charging technology with single-chip microcomputer (MCU), which can accurately track the battery charging process and always bring the battery to the best electrochemical reaction state to prolong its life.The control circuit uses advanced high-bridge transformer -LLC half-bridge control technology. The solid housing provides good heat dissipation and improves the efficiency of the charger.
Applications:
Chargers of this series are used for charging 8S-25.6V lithium batteries on LiFePO4 technology
Scope of delivery:
1 x Charger 1 x Mains cable1 x Operating instructions
Available
SWAYTRONIC - LiFePO 4 Battery Charger 58.4V 20A
Battery Charger LiFePO4 58.4V/20A
The battery charger features 3-stage intelligent charging technology with single-chip microcomputer (MCU), which can accurately track the battery charging process and always bring the battery to the best electrochemical reaction state to prolong its life.The control circuit uses advanced high-bridge transformer -LLC half-bridge control technology. The solid housing provides good heat dissipation and improves the efficiency of the charger.
Applications:
Chargers of this series are used for charging 16S-51.2V lithium batteries on LiFePO4 technology
Scope of delivery:
1 x Charger 1 x Mains cable1 x Operating instructions
Available