SWAY-FPV 2S 7.4V 550mAh 60C/120C XT30 / JST T2
Order until 15:00 (Local time Europe/Zurich) and your selection will most likely be shipped today.
SWAYTRONIC
SWAY-FPV 2S 7.4V 550mAh 60C/120C XT30 / JST T2
Plug-in system:
XT30 & JST
Measures:
62x17x14 mm
Weight:
0.033
Kg.
Product number:
7640182622350
Availability:
Available
Delivery Time:
1 - 2 days
Rating:
(1)
CHF 13.90*
Accessories
Please select here conveniently other products from Accessories and Similar items and add them to your order by clicking on the shopping cart in the desired quantity.
Product information "SWAY-FPV 2S 7.4V 550mAh 60C/120C XT30 / JST T2"
BEST - Performance: 50C - 60C/ 120C
Motivation
Power without end! This embodies the BEST-Performance LiPos from Swaytronic.
Technology and performance
In addition to the already high quality features of the ECO line, two new processes have been integrated into the production of the BEST-Performance line.
Swaytronic cell match:
When assembling the battery packs, it is checked that only cells with identical internal resistances are assembled.
YOUR ADVANTAGE: The performance of a LiPo battery is only as strong as its weakest link. If a LiPo therefore has a cell with higher internal resistance, this affects the performance of the complete battery pack.
With "Swaytronic-Cell-Match" this problem is a thing of the past!
Ultrasonic connection:
The different cells (1S,2S,3S,4S,etc.) of a LiPo battery pack are normally connected with a soldered tin joint. Apart from the small factor of additional weight, this primarily entails an increase in resistance and reduction in conductivity , which in turn has a negative effect on the performance of the LiPo. With Swaytronic's ultrasonic connection, this factor is minimised. The BEST-Performance LiPo cells are connected with an ultrasonic weld. This has a positive effect on the weight and reduces the resistance of the connection, resulting in a higher current flow!
Application
RC - jet, plane, helicopter or car. Like the ECO-Performance, the BEST-Performance from Swaytronic covers a wide and deep segment of applications
Customer benefits
More power with less weight! A power which is suitable for almost every application.
| Balance plug-in system: | XH |
|---|---|
| Brand: | Swaytronic |
| Configuration: | 2S1P |
| Connection cable (AWG): | 18 |
| Continuous discharge rate (C): | 60 |
| Design: | Soft case |
| Height (mm): | 14 |
| Length (mm): | 62 |
| Maximum discharge rate (surge) (C): | 120 |
| Nominal capacity (mAh): | 550 |
| Performance Line: | Best Performance |
| Plug-in system: | XT30 & JST |
| Rated voltage (V): | 7.4 |
| Technology: | LiPo |
| Watt hours (Wh): | 4.07 |
| Weight (gr.): | 33 |
| Width (mm): | 17 |
| BETA-FPV Models | Beta65 Pro 2 Brushless Whoop Quadcopter |
|---|---|
| Beta65X 2S Whoop Quadcopter | |
| Beta75 Pro 2 Brushless Whoop Quadcopter | |
| Beta75X 2S Whoop Quadcopter | |
| Beta85X Whoop Quadcopter |
Login
September 13, 2021 09:57
Wird in der QX200 geflogen, passt gut rein, Flugzeit O.K.
Warranty LiPo battery
Wear parts such as rechargeable batteries and batteries are excluded from the warranty by Swaytronic as well as by trade partners. Within the first 3 months from the date of collection or delivery, Swaytronic may, at its discretion, provide a voluntary warranty as a gesture of goodwill. However, this requires compliance with the safety regulations according to Article 7 of our GTC. Furthermore, an inspection of the damage in our company is mandatory. No warranty claim can be decided on the basis of pictures or other data.
Devices, models or accumulators which are equipped with a serial number will be recorded by us at goods receipt and goods issue and assigned to the end customer.
Removing the serial number (sticker/inscription) will void the warranty.
The complete warranty conditions can be found in our AGB`s:
Recommendations
Tip
SWAYTRONIC LiPo SAFE-BAG black
Swaytronic LiPo SAFE-BAG
Protect yourself and your surroundings with the Swaytronic LiPo-Safe Bag.Made from fireproof material for optimum initial protection.
ATTENTION
The Lipo Safe Bag is designed to provide initial protection in the event of a battery fire. These products are not suitable for long-term storage of LiPos and accumulators. For a storage solution, Swaytronic recommends the LiPo Safe Case.
Available
Tip
FIREBALLS Fire Protection - Fire Extinguishing Granules 5 litres
FIREBALLS Fire protection fire extinguishing granulate for lithium ion batteries / 5 litres
New and sensational.
This fire extinguishing granulate is the perfect solution for the safe storage and extinguishing of lithium polymer batteries in case of fire.With the fire extinguishing granulate you are also perfectly prepared for all lithium fires in your workshop. If a battery should ignite, you can extinguish it quickly, safely and above all cleanly with the granulate!The granulate is applied softly to the fire. The expanded glass granulate surrounds the fire and smothers it. At particularly high temperatures, the expanded glass melts and spreads over the surface of the burning metal. The melt forms an airtight seal that crusts over as it cools, extinguishing the metal fire. A reignition is effectively prevented.The fire extinguishing granulate is suitable for class D and lithium ion fire loads. Problematic fire loads such as metal fires, battery fires, lithium fires or flammable liquids can be controlled and extinguished with the granulate without causing extinguishing agent damage.The extinguishing effect of the granulate on metal fires was tested and confirmed by the MPA Dresden using a sodium and magnesium fire.
Product features
Forms a protective layerDisplaces oxygenEnvironmentally friendlyResistant to ageingLow weightEasy to handleRetrofittable and maintenance-freeVery good liquid bindingAcid and alkali resistant100% inorganic Inert, low-reactionLow weight (low landfill costs of contaminated material)Low heat conductionSound-absorbingNon-perishableBacteria- and germ-free
Technical data
Supplied in sealed plastic bagCapacity=5 litresBall size=1 to 4mmWeight with packaging=1.2kgPackaging/dimensions = 345x145mm
Available
Tip
SWAYTRONIC LiPo SAFE-BAG white
Swaytronic LiPo SAFE-BAG
Protect yourself and your surroundings with the Swaytronic LiPo-Safe Bag.Made from fireproof material for optimum initial protection.
ATTENTION
The Lipo Safe Bag is designed to provide initial protection in the event of a battery fire. These products are not suitable for long-term storage of LiPos and accumulators. For a storage solution, Swaytronic recommends the LiPo Safe Case.
Available
High quality 3in1 battery balancer / discharger / Z
High quality 3in1 battery balancer / discharger / cell monitor
This balancer can be used for Lipo and LiFe batteries. It measures the cell condition and can be used as a balancer to optimally balance the cells. In discharge mode, the cells can also be prepared for winter storage, for example.The cell charge status is displayed during the entire balancing process. This means that faulty cells can also be detected quickly before a crash is risked in flight.Supported battery types: Li-Polymer / Li-Fe:2 - 6 cells / 7.4V -22.2V
Balance Setting Range (lower limit) : 2V - 4.2V (preset with 3.3V)
Discharge Setting Range (lower limit) : 2V - 4.2V (preset with 3.9V)
Available
Tip
SWAYTRONIC LiPo SAFE-BAG red
Swaytronic LiPo SAFE-BAG
Protect yourself and your surroundings with the Swaytronic LiPo-Safe Bag.Made from fireproof material for optimum initial protection.
ATTENTION
The Lipo Safe Bag is designed to provide initial protection in the event of a battery fire. These products are not suitable for long-term storage of LiPos and accumulators. For a storage solution, Swaytronic recommends the LiPo Safe Case.
Available
Tip
LiPo voltage tester 1S - 8S digital and programmable
LiPo voltage tester 1S - 8S digital and programmable
This voltage tester shows you the condition of your battery or cells within seconds.
1-8S Lipo / Li-ion / LiMn / Li-Fe.Voltage detection Accuracy: ± 0.01 V1S test mode Voltage range: 4-15VLow voltage alarm mode for 2-8SAlarm set point range: Off 2.7-3.8VWeight: 9g
Functions:
Display total voltage (all cells) and the individual voltage of each cell.During operation / use of a LiPo battery, the battery tester monitors the battery. The individual cells are permanently checked for their voltage and the alarm is automatically triggered when the set cell voltage of the cells is reached / undercut.Connect a battery (1-8 cells LiPo) to the balance plug of the battery tester. The voltage tester acknowledges the connection of the battery with 2 x 5 beeps. The display shows the total voltage (ALL) of the battery in volts and then changes to the voltage of the individual cells (No 1...No 2... No 3... etc.)
Setting the alarm for the cell voltage you want:
Press the button (lower edge button) once. The tester shows the currently set voltage value in volts (based on 1 cell). If this value corresponds to your wish, the programming is finished and the battery tester changes back to the home position in the display.If you want to change the alarm value, press the button twice. The battery tester switches to the next possible value.Repeat this step until the setting you want is displayed.
Programme options:
OFF / 2.70 V to 3.8 V at intervals of 0.10VPress the button once =display the set alarm valuePress the button twice=switch to the next valuePress the button several times to scroll through all values.
Recommendation:The alarm value should not be set below 3.3 volts! LiPo batteries react very sensitively to deep discharge.
Available
Tip
SWAYTRONIC LiPo Box black L
Swaytronic LiPo BOX black
Protect yourself and your surroundings with the Swaytronic LiPo BOX.Size: 250 x 150 x 100mm, made of fireproof material for optimal protection.
Available
Tip
SWAYTRONIC Charge Marker (2 pieces)
Swaytronic Charge Marker (2pcs.)
Charge Marker - manual charge level indicator red/greenWho doesn't know the problem of losing track of the charge level with many batteries? The solution now comes in the form of the small and ingenious Charge Marker. The Charge Marker can be
the Charge Marker can be attached directly to the battery using an integrated adhesive strip and can be used immediately.
Slide the slider to green after charging. After use, simply switch the slider back to red. This way you'll never lose control of the charge level of your batteries again and you'll always be ready for another flight!
Available
Tip
SWAY-FPV LiPo 2S 7.4V 450mAh 80C/160C XT30
ULTRA - Performance: 70C - 200C
Motivation
The best has never been good enough for you? With Swaytronic's ULTRA performance line, limits are not reached...they are exceeded!
Technology and Performance
In addition to the high quality manufacturing process of the BEST-Performance, additional additives mixed into the cell chemistry of the ULTRA-Performance line ensure maximum power density. The internal resistances settle at an "all-time low" after just a few cycles - and provide more power than you need
Application
The focus of ULTRA performance is on FPV drone racing, high-performance JET models and 3D heli flying. But selected other areas are also covered.
Customer benefits
Our Ultra-Performance cells are used wherever all previously used cells were not powerful or stable enough, or reached the critical temperature range.
More is currently not possible - the ULTRA-Perfomance cells offer a performance that is unparalleled.
Available
Sale %
SWAY-FPV LiPo 2S 7.4V 650mAh 75C/150C XT30 / JST
ULTRA - Performance: 70C - 200C
Motivation
The best has never been good enough for you? With Swaytronic's ULTRA performance line, limits are not reached...they are exceeded!
Technology and Performance
In addition to the high quality manufacturing process of the BEST-Performance, additional additives mixed into the cell chemistry of the ULTRA-Performance line ensure maximum power density. The internal resistances settle at an "all-time low" after just a few cycles - and provide more power than you need
Application
The focus of ULTRA performance is on FPV drone racing, high-performance JET models and 3D heli flight. But selected other areas are also covered.
Customer benefits
Our Ultra-Performance cells are used wherever all previously used cells were not powerful or stable enough, or reached the critical temperature range.
More is currently not possible - the ULTRA-Perfomance cells offer a performance that is unparalleled.
Available
29
SWAY-FPV 2S 7.4V 450mAh 60C/120C XT30 / JST
BEST - Performance: 50C - 60C/ 120C
Motivation
Power without end! This embodies the BEST-Performance LiPos from Swaytronic.
Technology and performance
In addition to the already high quality features of the ECO line, two new processes have been integrated into the production of the BEST-Performance line.
Swaytronic cell match:When assembling the battery packs, it is checked that only cells with identical internal resistances are assembled. YOUR ADVANTAGE: The performance of a LiPo battery is only as strong as its weakest link. If a LiPo therefore has a cell with higher internal resistance, this affects the performance of the complete battery pack.With "Swaytronic-Cell-Match" this problem is a thing of the past!Ultrasonic connection:The different cells (1S,2S,3S,4S,etc.) of a LiPo battery pack are normally connected with a soldered tin joint. Apart from the small factor of additional weight, this primarily entails an increase in resistance and reduction in conductivity , which in turn has a negative effect on the performance of the LiPo. With Swaytronic's ultrasonic connection, this factor is minimised. The BEST-Performance LiPo cells are connected with an ultrasonic weld. This has a positive effect on the weight and reduces the resistance of the connection, resulting in a higher current flow!
Application
RC - jet, plane, helicopter or car. Like the ECO-Performance, the BEST-Performance from Swaytronic covers a wide and deep segment of applications
Customer benefits
More power with less weight! A power which is suitable for almost every application.
Available